Catalog Number
PMLBD-5500-A
UPC
736953012837.0
Description
PVC coated LBD conduit bodies are used at 90˚ bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings, or to allow conductor entrance into motors. Electrical continuity of the conduit system is maintained across assembled joints.
Application
Used at 90 degree bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings, or to allow conductor entrance into motors
Features
40 mil gray PVC exterior coating
2 mil green urethane interior coating
10 trade sizes from 1/2" through 4"
Sealing sleeves on all conduit openings
Molded-in seal between body and cover
Domed covers allow gentle bends of conductors
Shipped with covers
Angled covers allow straight pulling in either direction
General Information
Trade Size
1-1/2
Material
ALUMINUM
UL QR Link
Material
ALUMINUM
Exterior Finish
A nominal .040 inch (40 mil) gray PVC coating
Interior Finish
A nominal .002 inch (2 mil) green urethane
Dimensions
Dimension A (Inches)
12.44
Dimension B (Inches)
5.48
Dimension C (Inches)
4.71
Dimension D (Inches)
2.63
Dimension E (Inches)
10.88
Technical Information
Conduit Body
LBD
Feed Type
Feed Thru
Fitting Type
PULLING ELBOW
Product Category
FITTING
Product Family
Pulling Elbows