Chico SpeedSeal (6 oz Cartridge)

Installs a reliable seal in five minutes – every time.

Hardens to a dense, strong mass that is suitable for Class I, Division 1, Groups C, D and Class II, Division 1, Groups E, F, G hazardous applications.

UL and cUL Listed for use with 1/2 inch to 2 inch Plasti-Bond series sealing fittings only.

Packaged in a 2 oz or 6 oz pre-measured cartridge, eliminating the need for measuring before mixing.

Packaged with a screw-on nozzle for accurate dispensing.

Expands in the sealing fitting, eliminating the need to separate the individual conductors with Chico X fiber.

Chico X fiber dams are not required in horizontal applications, reducing installation times.

Completely hardens in 20 minutes, simplifying use for OEMs.

Suitable for cold temperature environments without the costly need to build a temporary shelter around sealing fittings; all ice crystals must be removed from inside the conduit seal before dispensing Chico SpeedSeal compound; the compound should be kept above 10°C (50°F) and below 85°F (29°C) prior to mixing; the sealing fitting must be kept at or above 4°C (40°F) during the 4 to 10 minute expansion/gel time of the compound.

18 month shelf life.